Installing the Active Directory Module for Windows PowerShell 2.0

With the release of PowerShell 2.0, we now have a PowerShell module that we can use to administer Active Directory. The Active Directory Module for Windows PowerShell runs on Windows Server 2008 R2 and on Windows 7 and relies on a web service that is hosted on one or more domain controllers in your environment. In this post I'll go over what you need in order to install and use the Active Directory Module for PowerShell, also known as AD PowerShell.
 

Setting up your Domain Controllers

In order to use the Active Directory Module for Windows PowerShell on 2008 R2 and Windows 7, you first need to be running Active Directory Web Services (ADWS) on at least one Domain Controller. To install Active Directory Web Services (ADWS) you'll need one of the following:

1. Windows Server 2008 R2 AD DS

You can load Active Directory Web Services (ADWS) on a Windows Server 2008 R2 Domain Controller when you install the AD DS role. The AD PowerShell module will also be installed during this process. Active Directory Web Services (ADWS) will be enabled when you promote the server to a DC using DCPromo.

2. Active Directory Management Gateway Service

If you cannot run Windows Server 2008 R2 Domain Controllers, you can install the Active Directory Management Gateway Service. Installing this will allow you to run the same Active Directory web service that runs on Windows Server 2008 R2 DC's. You can download the Active Directory Management Gateway Service here. Make sure you read the instructions carefully, there are several hotfixes that need to be applied depending on the version of Windows you are running. You can install the Active Directory Management Gateway Service on DC's running the following operating systems:

• Windows Server 2003 R2 with Service Pack 2
• Windows Server 2003 SP2
• Windows Server 2008
• Windows Server 2008 SP2

Note: You can also use AD PowerShell to manage AD LDS instances on Windows Server 2008 R2. If you plan on using AD LDS, Active Directory web services will be installed with the AD LDS role, the AD PowerShell module will also be installed during this process. The ADWS service will be enabled when your LDS instance is created.

Once you've got Active Directory web services up and running on your Domain Controller(s), you'll notice you now have an ADWS service as shown here:



At this point, you should be ready to install the AD PowerShell module. You can run AD PowerShell on all versions of Windows Server 2008 R2 (except the Web Edition) and on Windows 7.

Installing the Active Directory Module for Windows PowerShell on 2008 R2 member servers

You can install the Active Directory Module on Windows 2008 R2 member servers by adding the RSAT-AD-PowerShell feature using the Server Manager. I usually use the ServerManager module to do this because it is quick and easy. To install the feature using the ServerManager module, launch PowerShell and run the following commands:

Import-Module ServerManager
Add-WindowsFeature RSAT-AD-PowerShell



Remember, this only needs to be done on Windows Server 2008 R2 member servers. The RSAT-AD-PowerShell feature will be added to 2008 R2 DC's during the DCPromo process.

Installing the Remote Server Administration Tools (RSAT) feature on Windows 7

In order to install the Active Directory Module for Windows PowerShell you need to download the RSAT tools for Windows 7 here. Once this is installed you are still not finished, you need to enable the Active Directory module. Navigate to Control Panel > Programs and Features > Turn Windows Features On or Off and select Active Directory Module for Windows PowerShell as show here:



Once you have Active Directory web services running on at least one domain controller and the AD PowerShell module is installed, you are ready to run the AD PowerShell module. You can do this in one of two ways. First, you can access the "Active Directory Module for Windows PowerShell" shortcut in Administrative Tools as shown here:



Right click the shortcut and select "Run as administrator" in order to start PowerShell with elevated permissions.

You can also simply import the AD PowerShell module in your existing PowerShell session. Just use the Import-Module ActiveDirectory command:

Import-Module ActiveDirectory

That's all that needs to be done to get up and running.

 

Below is a list of the new AD cmdlets that will be available and a synopsis of what they do.

Name	Category	Synopsis
Add-ADComputerServiceAccount	Cmdlet	Adds one or more service accounts to an Active Directory computer.
Add-ADDomainControllerPasswordReplicationPolicy	Cmdlet	Adds users, computers, and groups to the allowed or denied list of a read-only domain controller password replication policy.
Add-ADFineGrainedPasswordPolicySubject	Cmdlet	Applies a fine-grained password policy to one more users and groups.
Add-ADGroupMember	Cmdlet	Adds one or more members to an Active Directory group.
Add-ADPrincipalGroupMembership	Cmdlet	Adds a member to one or more Active Directory groups.
Clear-ADAccountExpiration	Cmdlet	Clears the expiration date for an Active Directory account.
Disable-ADAccount	Cmdlet	Disables an Active Directory account.
Disable-ADOptionalFeature	Cmdlet	Disables an Active Directory optional feature.
Enable-ADAccount	Cmdlet	Enables an Active Directory account.
Enable-ADOptionalFeature	Cmdlet	Enables an Active Directory optional feature.
Get-ADAccountAuthorizationGroup	Cmdlet	Gets the accounts token group information.
Get-ADAccountResultantPasswordReplicationPolicy	Cmdlet	Gets the resultant password replication policy for an Active Directory account.
Get-ADComputer	Cmdlet	Gets one or more Active Directory computers.
Get-ADComputerServiceAccount	Cmdlet	Gets the service accounts hosted by a computer.
Get-ADDefaultDomainPasswordPolicy	Cmdlet	Gets the default password policy for an Active Directory domain.
Get-ADDomain	Cmdlet	Gets an Active Directory domain.
Get-ADDomainController	Cmdlet	Gets one or more Active Directory domain controllers based on discoverable services criteria, search parameters or by providing a domain controller identifier, such as the NetBIOS name.
Get-ADDomainControllerPasswordReplicationPolicy	Cmdlet	Gets the members of the allowed list or denied list of a read-only domain controller's password replication policy.
Get-ADDomainControllerPasswordReplicationPolicyUsage	Cmdlet	Gets the Active Directory accounts that are authenticated by a read-only domain controller or that are in the revealed list of the domain controller.
Get-ADFineGrainedPasswordPolicy	Cmdlet	Gets one or more Active Directory fine grained password policies.
Get-ADFineGrainedPasswordPolicySubject	Cmdlet	Gets the users and groups to which a fine grained password policy is applied.
Get-ADForest	Cmdlet	Gets an Active Directory forest.
Get-ADGroup	Cmdlet	Gets one or more Active Directory groups.
Get-ADGroupMember	Cmdlet	Gets the members of an Active Directory group.
Get-ADObject	Cmdlet	Gets one or more Active Directory objects.
Get-ADOptionalFeature	Cmdlet	Gets one or more Active Directory optional features.
Get-ADOrganizationalUnit	Cmdlet	Gets one or more Active Directory organizational units.
Get-ADPrincipalGroupMembership	Cmdlet	Gets the Active Directory groups that have a specified user, computer, group, or service account.
Get-ADRootDSE	Cmdlet	Gets the root of a Directory Server information tree.
Get-ADServiceAccount	Cmdlet	Gets one or more Active Directory service accounts.
Get-ADUser	Cmdlet	Gets one or more Active Directory users.
Get-ADUserResultantPasswordPolicy	Cmdlet	Gets the resultant password policy for a user.
Install-ADServiceAccount	Cmdlet	Installs an Active Directory service account on a computer.
Move-ADDirectoryServer	Cmdlet	Moves a directory server in Active Directory to a new site.
Move-ADDirectoryServerOperationMasterRole	Cmdlet	Moves operation master roles to an Active Directory directory server.
Move-ADObject	Cmdlet	Moves an Active Directory object or a container of objects to a different container or domain.
New-ADComputer	Cmdlet	Creates a new Active Directory computer.
New-ADFineGrainedPasswordPolicy	Cmdlet	Creates a new Active Directory fine grained password policy.
New-ADGroup	Cmdlet	Creates an Active Directory group.
New-ADObject	Cmdlet	Creates an Active Directory object.
New-ADOrganizationalUnit	Cmdlet	Creates a new Active Directory organizational unit.
New-ADServiceAccount	Cmdlet	Creates a new Active Directory service account.
New-ADUser	Cmdlet	Creates a new Active Directory user.
Remove-ADComputer	Cmdlet	Removes an Active Directory computer.
Remove-ADComputerServiceAccount	Cmdlet	Removes one or more service accounts from a computer.
Remove-ADDomainControllerPasswordReplicationPolicy	Cmdlet	Removes users, computers and groups from the allowed or denied list of a read-only domain controller password replication policy.
Remove-ADFineGrainedPasswordPolicy	Cmdlet	Removes an Active Directory fine grained password policy.
Remove-ADFineGrainedPasswordPolicySubject	Cmdlet	Removes one or more users from a fine grained password policy.
Remove-ADGroup	Cmdlet	Removes an Active Directory group.
Remove-ADGroupMember	Cmdlet	Removes one or more members from an Active Directory group.
Remove-ADObject	Cmdlet	Removes an Active Directory object.
Remove-ADOrganizationalUnit	Cmdlet	Removes an Active Directory organizational unit.
Remove-ADPrincipalGroupMembership	Cmdlet	Removes a member from one or more Active Directory groups.
Remove-ADServiceAccount	Cmdlet	Remove an Active Directory service account.
Remove-ADUser	Cmdlet	Removes an Active Directory user.
Rename-ADObject	Cmdlet	Changes the name of an Active Directory object.
Reset-ADServiceAccountPassword	Cmdlet	Resets the service account password for a computer.
Restore-ADObject	Cmdlet	Restores an Active Directory object.
Search-ADAccount	Cmdlet	Gets Active Directory user, computer, or service accounts.
Set-ADAccountControl	Cmdlet	Modifies user account control (UAC) values for an Active Directory account.
Set-ADAccountExpiration	Cmdlet	Sets the expiration date for an Active Directory account.
Set-ADAccountPassword	Cmdlet	Modifies the password of an Active Directory account.
Set-ADComputer	Cmdlet	Modifies an Active Directory computer object.
Set-ADDefaultDomainPasswordPolicy	Cmdlet	Modifies the default password policy for an Active Directory domain.
Set-ADDomain	Cmdlet	Modifies an Active Directory domain.
Set-ADDomainMode	Cmdlet	Sets the domain mode for an Active Directory domain.
Set-ADFineGrainedPasswordPolicy	Cmdlet	Modifies an Active Directory fine grained password policy.
Set-ADForest	Cmdlet	Modifies an Active Directory forest.
Set-ADForestMode	Cmdlet	Sets the forest mode for an Active Directory forest.
Set-ADGroup	Cmdlet	Modifies an Active Directory group.
Set-ADObject	Cmdlet	Modifies an Active Directory object.
Set-ADOrganizationalUnit	Cmdlet	Modifies an Active Directory organizational unit.
Set-ADServiceAccount	Cmdlet	Modifies an Active Directory service account.
Set-ADUser	Cmdlet	Modifies an Active Directory user.
Uninstall-ADServiceAccount	Cmdlet	Uninstalls an Active Directory service account from a computer.

 

Installation and Configuration of the Windows Server 2008 SMTP Server Feature

Installing the SMTP Server Feature on Windows 2008 is an easy process requiring only few steps to complete. In this article I will describe the step by step configuration and installation of the SMTP Server feature and how to enable the smtp to relay from the local server.

Step 1:
Opening Server Manager Console and under Features select Add Features

Step 2:
Selecting SMTP Server option

Step 3:
Click on Install wait until finish and click close

Step 4:
Waiting for installation to finish and clicking on Close

Step 5:
Opening IIS 6.0 Manager under Administrative Tools -> Internet Information Services 6.0

Step 6:
Under [SMTP Virtual Server] second mouse click and properties

Step 7:
Select Relay under Access Tab

Step 8:
Select Only the list below and click on Add button

Step 9:
Enter IP Address 127.0.0.1 for relay

Step 10:
Sending a manual email through telnet to confirm everything working successfully.Telnet localhost 25 or telnet your public ip 25 and make sure you open the specific port on your firewall to be available to public.
To end message hit ENTER then a period then hit ENTER again

You will need to in an administrative command prompt and type “Telnet localhost 25 or telnet ‘outside IP’ 25″.  If you get the message “‘telnet’ is not recognized as an internal or external command,” then you need to install telnet. see here http://technet.microsoft.com/en-us/library/cc771275(v=WS.10).aspx

What’s New in Windows 8 Startup Menu

The Windows 8 Startup menu has a new Metro look.